| Established in 1952 | |
Page: 3340 |
| CMM-12 |
Extensions for CMM Probe Characterization SpheresTwo standard lengths of this version are available. The 3.00 inch (76.2mm) long version (Part Number P-EP-3) and the 6.00 inch (152.4mm) long (Part Number P-EP-6). The 1-1/4 inch ( 31.75 mm ) diameter extension posts have a 3/16 inch ( 4.76 mm ) clearance hole cross-drilled through the post diameter. A high tensile stainless steel pin that passes through this hole is used to tighten and to remove the device from its mating part. |
 |
Extensions for "The Big One" ( Part Number BO-PM B200 ) are 2.00 inches ( 50.8 mm ) diameter to match its post. Two standard lengths of this version are available. The 3.00 inch ( 76.2 mm ) long version ( Part Number BO-EP-3 ) and the 6.00 inch (152.4 mm ) long (Part Number BO-EP-6).
The 2.00 inch ( 50.8 mm ) diameter extension posts have a 1/4 inch ( 6.3 mm ) diameter clearance hole cross-drilled through the diameter of the post. A high tensile stainless steel pin that passes through this hole is used to tighten and to remove the device from its mating part.
Both ends of all extension posts are drilled and tapped M 10 x 1.5. This configuration is compatible with our full line of accessories.
The center portions of both of the flat ends of all extension posts are recessed to leave annular ring. This flat ring forms a stable connection with the mating parts.
All extensions are provided with an attractive black oxide finish which resists corrosion.
| Part # | Description | Price | Purchase |
| BO-EP-3 | BIG ONE, EXTENSION 3 INCHES, 2" DIAMETER | $35.85 |  |
| BO-EP-6 | BIG ONE, EXTENSION 6 INCHES, 2" DIAMETER | $35.98 | |
| P-EP-3 | EXTENSION, 3 INCHES, 1 1/4" DIAMETER | $34.68 | |
| P-EP-6 | EXTENSION, 6 INCHES, 1 1/4" DIAMETER | $35.85 | |
| < CMM-11, 45 degree angle block |
http://www.precisionballs.com/ |
||||||||
|---|---|---|---|---|---|---|---|---|