Bal-tec My Account  Cart Contents  Checkout  
  Home Page » Catalog » EG-3000 My Account  |  Cart Contents  |  Checkout   
Categories
Aluminum Balls
Beryllium Copper ( BECU ) Balls
Brass Balls
Castings
Chrome Steel Balls, Stock
CMM Products
Copper Balls
Hard Carbon Steel Balls, Stock
Kinematic Components
Nylon Balls, Stock
Poly Propylene Balls, Stock
Services
Soft Carbon Steel Balls, Stock ( Least Expensive )
Stainless Steel Balls, Stock
Tantalum Balls, Stock
Teflon Balls, Stock
Tools
Tungsten Carbide Balls, Stock
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
Information
Shipping & Returns
Privacy Notice
Conditions of Use
What's New? more
CHROME STEEL BALL 0.11811", 2.999994 mm Grd:25
CHROME STEEL BALL 0.11811", 2.999994 mm Grd:25
$7.5000
EPOXY GLUE TUBE
[EG-3000]
 $17.7100 

ASSEMBLING THE INDIVIDUAL KINEMATIC COMPONENTS INTO A COMPLETED COUPLING IS USUALLY DONE BY SECURING THEM IN POSITION WITH A HIGH STRENGTH EPOXY GLUE.

THESE HIGH STRENGTH INDUSTRIAL QUALITY GLUES ARE USUALLY PACKAGED IN VERY LARGE VOLUMES THAT ARE NOT AT ALL PRACTICAL FOR SMALL PROJECTS.

FOR MIXING INDUSTRIAL GLUES THE PROPORTIONS OF CATALYST TO POLYMER IS QUITE SMALL SO THE MIXTURES ARE CRITICAL AND MUST BE CAREFULLY WEIGHED OUT.

WE CONVINCED THE MANUFACTURER OF OUR FAVORITE EXTREME STRENGTH EPOXY GLUE TO PACKAGE IT IN SMALL TUBES FOR OUR CUSTOMER'S CONVENIENCE. TO MAKE IT MORE PRACTICAL, THE CONSTITUENTS ARE FORMULATED SO THAT TWO STRIPES OF EQUAL VOLUME ARE LAID DOWN AND THOROUGHLY MIXED TO PRODUCE A GLUE. THIS WILL CURE IN ONE DAY, AT ROOM TEMPERATURE, TO HAVE THE EXCEPTIONAL SHEER STRENGTH OF 3000 POUNDS PER SQUARE INCH, OR 21KG PER SQUARE CENTIMETER. THE EPOXY GLUE CAN BE ORDERED AS PART #: EG3000.

WHEN MIXING THE EPOXY, SQUEEZE OUT THE TWO STRIPS OF AT LEAST ONE AND ONE HALF INCHES (38MM) LONG, EVEN IF YOU ONLY NEED A SMALL AMOUNT! THIS IS IMPORTANT BECAUSE A SMALL ERROR IN SMALL AMOUNTS OF THE CONSTITUENTS WILL HAVE A DIRE EFFECT ON THE RESULTING PROPERTIES OF THE GLUE. ON THE OTHER HAND, A SMALL ERROR IN MUCH LARGER AMOUNTS OF THE TWO CONSTITUENTS WILL HAVE LITTLE EFFECT. YOU MAY REMEMBER FROM YOUR SCHOOL CHEMISTRY CLASS, THIS CONCEPT IS CALLED BARREL CHEMISTRY.

EPOXY GLUE IS NOT COMPATIBLE WITH WATER EVEN WHEN IT IS FULLY CURED. KEEP THE LAYER OF GLUE BETWEEN THE KINEMATIC COMPONENT AND THE PLATFORM AS THIN AND UNIFORM AS POSSIBLE. USE ISOPROPYL ALCOHOL TO REMOVE ANY SURPLUS GLUE FROM AROUND THE KINEMATIC COMPONENTS WHILE THE GLUE IS STILL LIQUID. THIS WILL LIMIT THE EXPOSURE OF THE GLUE LINE TO THE ATMOSPHERE, REDUCING MOISTURE ABSORPTION.

For more information, please visit this products webpage.
This product was added to our catalog on Thursday 29 May, 2008.
Quantity (Total Balls):
Customers who bought this product also purchased
VEE BLOCK, 0.750" ( 3/4" ), SURFACE MOUNTED
VEE BLOCK, 0.750" ( 3/4" ), SURFACE MOUNTED
MONOLITHIC TRIHEDRAL, 0.75", 3/4"
MONOLITHIC TRIHEDRAL, 0.75", 3/4"
TRUNCATED AND RECESSED BALL, STAINLESS STEEL, 0.7500", ( 3/4"), 19.05 MM
TRUNCATED AND RECESSED BALL, STAINLESS STEEL, 0.7500", ( 3/4"), 19.05 MM
CHROME STEEL BALL 0.25", 6.35 mm Grd:5
CHROME STEEL BALL 0.25", 6.35 mm Grd:5
DIAMOND CHARGED BALL ON STEM, SIZE: 1/2" - 0.500", 6 MICRON DIAMOND LAP
DIAMOND CHARGED BALL ON STEM, SIZE: 1/2" - 0.500", 6 MICRON DIAMOND LAP
DIAMOND CHARGED BALL, SIZE: 1/2" - 0.500",  6 MICRON DIAMOND LAP
DIAMOND CHARGED BALL, SIZE: 1/2" - 0.500", 6 MICRON DIAMOND LAP
Shopping Cart more
0 items

Copyright © 2024 Bal-tec
Powered by osCommerce