Bal-tec My Account  Cart Contents  Checkout  
  Home Page » Catalog » CMM Products » BL-960 My Account  |  Cart Contents  |  Checkout   
Categories
Aluminum Balls
Beryllium Copper ( BECU ) Balls
Brass Balls
Castings
Chrome Steel Balls, Stock
CMM Products
Copper Balls
Hard Carbon Steel Balls, Stock
Kinematic Components
Nylon Balls, Stock
Poly Propylene Balls, Stock
Services
Soft Carbon Steel Balls, Stock ( Least Expensive )
Stainless Steel Balls, Stock
Tantalum Balls, Stock
Teflon Balls, Stock
Tools
Tungsten Carbide Balls, Stock
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
Information
Shipping & Returns
Privacy Notice
Conditions of Use
What's New? more
440 STAINLESS STEEL BALL 0.532095", 13.515213 mm Grd:25
440 STAINLESS STEEL BALL 0.532095", 13.515213 mm Grd:25
$12.7000
PRUSSIAN BLUE
[BL-960]
 $9.2730 

A LITTLE PRUSSIAN BLUING WILL GO A LONG WAY, USE IT SPARINGLY.

PRUSSIAN BLUING WILL STAIN ANYTHING THAT IT TOUCHES, INCLUDING YOUR FINGERS.

A GOOD CLEANING AGENT FOR PRUSSIAN BLUING IS ISOPROPYL ALCOHOL. SMALL AMOUNTS OF ISOPROPYL ALCOHOL ARE AVAILABLE FROM ANY DRUG STORE, WHERE IT IS SOLD AS RUBBING ALCOHOL.

ISOPROPYL ALCOHOL IS FLAMMABLE, SO IT MUST BE USED WITH GREAT CARE.

WHEN USING THE BLUING TECHNIQUE, THERE ARE TWO GENERAL APPROACHES.

FOR METHOD NUMBER ONE, YOU PUT A LIGHT COAT OF PRUSSIAN BLUING ON THE TEST PART AND THEN USE THE BALL PLUG GAGE TO WIPE THE BLUING OFF.

THIS IS THE TECHNIQUE THAT IS USUALLY USED TO INSPECT BALL BEARING RACE WAYS.

FOR METHOD NUMBER TWO, WHICH IS SOMETIMES CALLED PRINTING, THE PRUSSIAN BLUING IS APPLIED TO THE BALL PLUG GAGE AND THEN TRANSFERRED TO THE TEST PART BY RUBBING THEM LIGHTLY TOGETHER. THIS PRINTING TECHNIQUE IS THE ONE THAT IS USUALLY USED FOR EVALUATING INTERNAL SPHERICAL SURFACES. WHEN USING THE TECHNIQUE OF TRANSFERRING PRUSSIAN BLUING TO THE TEST PART FROM THE BALL PLUG GAGE, IT IS HIGHLY RECOMMENDED THAT A SATIN FINISHED BALL PLUG GAGE BE USED.

A SATIN FINISHED SURFACE WILL HOLD A NICE EVEN, VERY THIN LAYER OF PRUSSIAN BLUING, WHILE THE USUAL SHINY, SLIPPERY LAPPED SURFACE, OF A STANDARD BALL, WILL HAVE A SPLOTCHY, THICKER LAYER.

AFTER THE SATIN FINISHED BALL PLUG GAGE IS VERY LIGHTLY COATED WITH PRUSSIAN BLUING, THE BALL PLUG GAGE IS PLACED INTO THE SPHERICAL CUP AND LIGHTLY RUBBED AND INDEXED.

IF THE BLUING HITS AT THE VERY TOP RIM OF THE SPHERICAL CUP, THEN THE SPHERICAL CUP IS SMALLER THAN THE BALL.

IF THE BLUING HITS AT THE VERY BOTTOM RING OF THE SPHERICAL CUP, THEN THE SPHERICAL CUP IS LARGER THAN THE BALL.

IF THE BLUING COVERS THE ENTIRE SURFACE OF THE SPHERICAL CUP, THEN THE BALL IS THE SAME RADIUS AS THE CUP.

IT IS VERY HARD TO MACHINE THE SPHERICAL CUP EXACTLY THE RIGHT RADIUS SO TOLERANCES ARE OFTEN SPELLED OUT IN THE PERCENTAGE OF THE SPHERICAL SURFACE THAT BLUES IN I.E. THE SPHERICAL SURFACE MUST BLUE INTO X.XXX DIAMETER BALL PLUG GAGE 80%.

ANOTHER APPROACH IS THAT THE SPHERICAL CUP MUST BE LARGER THAN ONE BALL SIZE AND SMALLER THAN ANOTHER. THE DANGER OF THIS TYPE OF TOLERANCING IS THAT THE SURFACE OF THE CUP MAY BE GROSSLY OUT OF SPHERICITY BUT STILL MEASURE GOOD.

USING THE TOLERANCING THAT THE BALL MUST BLUE INTO THE SPHERE A GIVEN PERCENT IS BY FAR THE BEST TOLERANCING APPROACH.

This product was added to our catalog on Tuesday 19 June, 2012.
Quantity (Total Balls):
Customers who bought this product also purchased
DIAMOND CHARGED BALL, SIZE: 13/32" - 0.40625", 6 MICRON DIAMOND LAP
DIAMOND CHARGED BALL, SIZE: 13/32" - 0.40625", 6 MICRON DIAMOND LAP
DIAMOND CHARGED BALL ON STEM, SIZE: 13/32" - 0.40625", 6 MICRON DIAMOND LAP
DIAMOND CHARGED BALL ON STEM, SIZE: 13/32" - 0.40625", 6 MICRON DIAMOND LAP
EPOXY GLUE TUBE
EPOXY GLUE TUBE
CHROME STEEL BALL 0.15625", 3.96875 mm, 5/32" Grd:5
CHROME STEEL BALL 0.15625", 3.96875 mm, 5/32" Grd:5
CHROME STEEL BALL 0.13071", 3.320034 mm Grd:25
CHROME STEEL BALL 0.13071", 3.320034 mm Grd:25
CHROME STEEL BALL 0.15662", 3.978148 mm Grd:25
CHROME STEEL BALL 0.15662", 3.978148 mm Grd:25
Shopping Cart more
0 items

Copyright © 2024 Bal-tec
Powered by osCommerce