Bal-tec My Account  Cart Contents  Checkout  
  Home Page » Catalog » CMM Products » VB-375-SM My Account  |  Cart Contents  |  Checkout   
Categories
Aluminum Balls
Beryllium Copper ( BECU ) Balls
Brass Balls
Castings
Chrome Steel Balls, Stock
CMM Products
Copper Balls
Hard Carbon Steel Balls, Stock
Kinematic Components
Nylon Balls, Stock
Poly Propylene Balls, Stock
Services
Soft Carbon Steel Balls, Stock ( Least Expensive )
Stainless Steel Balls, Stock
Tantalum Balls, Stock
Teflon Balls, Stock
Tools
Tungsten Carbide Balls, Stock
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
Information
Shipping & Returns
Privacy Notice
Conditions of Use
What's New? more
CHROME STEEL BALL 0.520015", 13.208381 mm Grd:25
CHROME STEEL BALL 0.520015", 13.208381 mm Grd:25
$12.7000
VEE BLOCK, 0.375" ( 3/8") SURFACE MOUNTED
[VB-375-SM]
 $50.6000 

THIS DEVICE IS DESIGNED TO ACCEPT SPHERES FROM FIVE SIXTEENTHS OF AN ( 5/16 INCH ) ( 0.3125 INCH ) [ 7.9MM ] TO ONE HALF INCH ( 1/2 INCH )( 0.5 INCH ) [ 12.7 MM ] DIAMETER. THREE EIGHTS OF AN INCH ( 0.375 INCH ) [ 9.5MM ] IS THE NOMINAL DIAMETER. THIS IS OUR PART # VB-375-SM.

THE FLAT MOUNTING SURFACE ON THE BACK SIDE OF THIS PART IS A PRECISION FLAT LAPPED ANNULESS.

THE INCLUDED ANGLE OF THIS VEE BLOCK IS 90 DEGREES.

THE MAJOR DIAMETER OF THIS VEE BLOCK IS THREE QUARTERS OF AN INCH ( ¾ INCH )( 0.75 INCH) [19MM].

THE FLAT FACES OF THE VEES OF THIS DEVICE ARE PRECISION GROUND ON A SPECIAL CUSTOM BUILT MACHINE WITH THE FACE OF THE GRINDING WHEEL, NOT THE PERIPHERY. THE RESULTING CRISSCROSS PATTERN BREAKS UP THE LAY OF THE SURFACE TEXTURE TO GIVE THIS COUPLE FAR SUPERIOR REPEATABILITY.

THIS DEVICE IS DESIGNED FOR SURFACE MOUNTING WITHOUT ANY PROTRUSIONS ON THE BACK SURFACE. IN ORDER TO ACHIEVE GREATER RIGIDITY THE OUTSIDE, THREE QUARTER INCH ( 3/4", 0.75", 19 MM) DIAMETER CAN BE EPOXY GLUED INTO A SHALLOW COUNTER BORE.

THE HOLD DOWN ARRANGEMENT ON THIS DEVICE CONSISTS OF TWO # 6-32 THREADED HOLES THAT ARE PRECISION SPACED 1/2 INCH, (0.5 INCH) [12.7 MM] APART.

THE VB-375-CPM HAS A CENTER THROUGH HOLE THAT IS ONE EIGHT OF AN INCH ( 1/8 INCH ) (0.125 INCH) [3.2MM] DIAMETER.

For more information, please visit this products webpage.
This product was added to our catalog on Tuesday 29 December, 2009.
Quantity (Total Balls):
Customers who bought this product also purchased
THREADED BALL, STAINLESS STEEL, 0.500", ( 1/2" ), 12.7 MM
THREADED BALL, STAINLESS STEEL, 0.500", ( 1/2" ), 12.7 MM
THREADED BALL, STAINLESS STEEL, 0.375", ( 3/8" ), 9.525 MM
THREADED BALL, STAINLESS STEEL, 0.375", ( 3/8" ), 9.525 MM
ROSE BUD, 0.375" ( 3/8" ), TRUNCATED, STAINLESS STEEL
ROSE BUD, 0.375" ( 3/8" ), TRUNCATED, STAINLESS STEEL
SCREW MOUNTED BALL, 1/2"
SCREW MOUNTED BALL, 1/2"
VEE BLOCK, 0.1875" ( 3/16" ), CYLINDRICAL POST MOUNTED
VEE BLOCK, 0.1875" ( 3/16" ), CYLINDRICAL POST MOUNTED
CONE, FEMALE 1.125" ( 1 1/8", 28.575 MM )DIAMETER, SURFACE MOUNT, STAINLESS STEEL
CONE, FEMALE 1.125" ( 1 1/8", 28.575 MM )DIAMETER, SURFACE MOUNT, STAINLESS STEEL
Shopping Cart more
0 items

Copyright © 2024 Bal-tec
Powered by osCommerce