Bal-tec My Account  Cart Contents  Checkout  
  Home Page » Catalog » 375-TRB My Account  |  Cart Contents  |  Checkout   
Categories
Aluminum Balls
Beryllium Copper ( BECU ) Balls
Brass Balls
Castings
Chrome Steel Balls, Stock
CMM Products
Copper Balls
Hard Carbon Steel Balls, Stock
Kinematic Components
Nylon Balls, Stock
Poly Propylene Balls, Stock
Services
Soft Carbon Steel Balls, Stock ( Least Expensive )
Stainless Steel Balls, Stock
Tantalum Balls, Stock
Teflon Balls, Stock
Tools
Tungsten Carbide Balls, Stock
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
Information
Shipping & Returns
Privacy Notice
Conditions of Use
What's New? more
CHROME STEEL BALL 0.11811", 2.999994 mm Grd:25
CHROME STEEL BALL 0.11811", 2.999994 mm Grd:25
$7.5000
ROSE BUD, 0.375" ( 3/8" ), TRUNCATED, STAINLESS STEEL
[375-TRB]
 $59.4000 

THE THREE BALL KINEMATIC COUPLING ( ROSEBUD ) IS ONE OF THE TOP PERFORMING LOCATION DEVICES. IT RESTRICTS THREE DEGREES OF FREEDOM, WITHOUT THE DISTORTION CAUSED BY CLAMPING FORCES. THIS THREE-BALL DEVICE TAKES THE PLACE OF THE CONICAL CUP USED IN THE CLASSICAL KINEMATIC SYSTEM. HOWEVER A THREE-BALL SYSTEM IS LIMITED TO RATHER LIGHT LOAD AS THE OVERALL SIZE OF THE COUPLING GROWS DRAMATICALLY WHEN LARGER BALLS MUST BE USED TO COPE WITH HEAVIER PAY LOADS.

THE SOLUTION IN HIGH LOAD SITUATIONS IS TO USE A ROSE BUD CONFIGURATION. BY CUTTING CYLINDRICAL FINGERS OUT OF THE SIDE OF A LARGE DIAMETER BALL, AND THEN CUTTING THIS FINGER IN HALF, A SMALL SUPER RIGID COMPONENT OR ROSE PETAL IS PRODUCED THAT IS EASY TO MOUNT ON THE KINEMATIC PLATFORM. TO RIGIDLY MOUNT THESE COMPONENTS, YOU SIMPLY MACHINE A 120 DEGREE "Y" SHAPED TRENCH IN THE PLATFORM, WITH AN END MILL OF A RADIUS, THAT MATCHES THE CYLINDRICAL RADIUS OF THE ROSE PETAL AND GLUE THE INDIVIDUAL COMPONENTS IN. BECAUSE THE RESULTING FORCE ON THE COMPONENTS IS DOWN AND OUT AND THEY ARE BURIED IN THE "Y" SHAPED TRENCH, THE LIMITING LOAD FACTOR IS THE STRENGTH OF THE MATERIAL THAT THE KINEMATIC PLATFORM IS MADE OF. THE SPHERICAL SURFACES OF THESE COMPONENTS RETAIN THE HIGH QUALITY GEOMETRY AND EXCELLENT SURFACE FINISH OF THE PRECISION BALLS THAT THEY WERE REMOVED FROM.

TO REDUCE THE OVERALL HEIGHT OF THE ASSEMBLY, THE TOPS OF THE CYLINDRICAL FINGERS ARE USUALLY CUT DOWN SOME.

THESE DEVICES CAN BE PREPARED FOR SURFACE MOUNTING BY DRILLING AND THREADING A HOLE IN THE BASE PLANE. WHEN THIS IS DONE, MUCH OF THE SYSTEM'S RIGIDITY IS LOST.

A SINGLE STANDARD COMPONENT HAS BEEN DEVELOPED THAT WILL FILL MOST KINEMATIC APPLICATIONS. A THREE EIGHTHS OF AN INCH ( 3/8", 9.53 MM) RADIUS, THAT IS THREE THREE QUARTERS OF AN INCH ( 3/4", 19 MM) DIAMETER CYLINDER IS CUT OUT OF A ONE AND ONE QUARTER INCH ( 1 1/4", 31.75 MM) DIAMETER SPHERE. THIS CYLINDRICAL FINGER IS THEN CUT IN HALF. THE NEST PROVIDED BY THREE OF THESE COMPONENTS IS COMPATIBLE WITH ANY BALL SIZE FROM THREE EIGHTHS OF AN INCH ( 3/8", 9.53 MM ) TO OVER ONE INCH ( 25.4 MM ) DIAMETER.

THE MATERIAL USUALLY USED FOR MANUFACTURING THESE COMPONENTS IS TUNGSTEN CARBIDE. THIS IS THE STIFFEST, HARDEST COMMERCIALLY AVAILABLE MATERIAL WITH A YOUNG'S MODULUS OF ELASTICITY OF 98,000,000 P.S.I. AND A HARDNESS OF 91 HRA.

THEY ARE ALSO AVAILABLE IN A MICRO GRAINED STAINLESS STEEL THAT IS HARDENED TO 58 HRC MINIMUM.

OTHER COMBINATIONS OF RADII AND MATERIAL WILL BE PRODUCED TO FILL ANY SPECIFIC CUSTOMER NEEDS. THESE INCLUDE CORROSION RESISTANCE AND SPECIAL MAGNETIC OR ELECTRICAL PROPERTIES.

For more information, please visit this products webpage.
This product was added to our catalog on Thursday 08 January, 2009.
Quantity (Total Balls):
Customers who bought this product also purchased
THREADED BALL, STAINLESS STEEL, 0.375", ( 3/8" ), 9.525 MM
THREADED BALL, STAINLESS STEEL, 0.375", ( 3/8" ), 9.525 MM
VEE BLOCK, 0.375" ( 3/8") SURFACE MOUNTED
VEE BLOCK, 0.375" ( 3/8") SURFACE MOUNTED
TRUNCATED THREADED BALL, STAINLESS STEEL, 0.3125", ( 5/16"), 7.937 MM
TRUNCATED THREADED BALL, STAINLESS STEEL, 0.3125", ( 5/16"), 7.937 MM
TRUNCATED THREADED BALL, STAINLESS STEEL, 1.000", ( 1"), 25.4 MM
TRUNCATED THREADED BALL, STAINLESS STEEL, 1.000", ( 1"), 25.4 MM
FLAT - SURFACE MOUNTED 0.875" ( 7/8", 22.22 MM )
FLAT - SURFACE MOUNTED 0.875" ( 7/8", 22.22 MM )
VEE BLOCK, 0.750" ( 3/4" ), SURFACE MOUNTED
VEE BLOCK, 0.750" ( 3/4" ), SURFACE MOUNTED
Shopping Cart more
0 items

Copyright © 2024 Bal-tec
Powered by osCommerce