Bal-tec My Account  Cart Contents  Checkout  
  Home Page » Catalog » 3B-KM My Account  |  Cart Contents  |  Checkout   
Categories
Aluminum Balls
Beryllium Copper ( BECU ) Balls
Brass Balls
Castings
Chrome Steel Balls, Stock
CMM Products
Copper Balls
Hard Carbon Steel Balls, Stock
Kinematic Components
Nylon Balls, Stock
Poly Propylene Balls, Stock
Services
Soft Carbon Steel Balls, Stock ( Least Expensive )
Stainless Steel Balls, Stock
Tantalum Balls, Stock
Teflon Balls, Stock
Tools
Tungsten Carbide Balls, Stock
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
Information
Shipping & Returns
Privacy Notice
Conditions of Use
What's New? more
CHROME STEEL BALL 0.25027", 6.356858 mm Grd:25
CHROME STEEL BALL 0.25027", 6.356858 mm Grd:25
$7.5000
THREE BALL KINEMATIC PLATFORM, 4"
[3B-KM]
 $215.0000 

THE THREE BALL KINEMATIC PLATFORM (OUR PART NUMBER 3B-KM) CAN BE USED WITH ANY BALL BAR (DUMBBELL) HAVING APPROXIMATELY ONE INCH (25.4MM) DIAMETER SPHERES. THIS TOOL WILL ALLOW YOU TO EVALUATE A COORDINATE MEASURING MACHINE IN ONE HALF THE TIME REQUIRED BY CONVENTIONAL MEANS. IT DOES THIS BY REDUCING THE NUMBER OF MEASUREMENTS THAT MUST BE TAKEN.

A MICRO-INCH ACCURATE REFERENCE DATUM IS CREATED AT ONE END OF THE BALL BAR (DUMBBELL). THIS FIXED REFERENCE DATUM CONSISTS OF A THREE BALL KINEMATIC COUPLING MOUNTED ON A RUGGED STEEL PLATFORM. ONE OF THE SPHERICAL ENDS OF THE BALL BAR (DUMBBELL) RESTS IN THE NEST FORMED BETWEEN THE THREE HIGH QUALITY STAINLESS STEEL BALLS.

THE OPPOSITE END OF THE BALL BAR (DUMBBELL) CAN NOW BE SWEPT TO DESCRIBE A MICRO INCH ACCURATE HEMISPHERICAL SHELL. WHILE MANY X-Y-Z POSITIONS OF THIS OUTER SPHERE ARE MEASURED, ONLY ONE MEASUREMENT FOR THE ORIGINAL POSITION OF THE REFERENCE DATUM BALL IS REQUIRED.

THE THREE BALL KINEMATIC COUPLING IS OF UNIQUE DESIGN. IT CONSISTS OF THREE ULTRA FINE-GRAIN TRUNCATED STAINLESS STEEL BALLS THAT ARE HARDENED TO 58 ROCKWELL C FOR LONG WEAR. THE PRECISION FLAT GROUND BASES OF THE THREE BALLS ARE HELD SOLIDLY AGAINST THE RIGID STEEL PLATFORM FROM BELOW BY THREE SOCKET HEAD CAP SCREWS. THESE HIGH QUALITY BALLS ARE .750 INCH (19.05MM) DIAMETER WITH A BLIND BOTTOM 1/4 INCH (6.35MM) DIAMETER HOLE, WITH 20 THREADS PER INCH (METRIC THREADS WILL BE SUPPLIED ON REQUEST). THIS DESIGN ALLOWS THE KINEMATIC BALLS TO BE INDEXED TO LITERALLY HUNDREDS OF NEW POSITIONS, THUS ASSURING MANY YEARS OF QUALITY USE.

THE 4 INCH (101.6MM) DIAMETER SOLID STEEL PLATFORMS IS 1-1/2 INCH (38.1MM) THICK AND WEIGHS OVER 5 LBS. (2.36KG). THERE IS A COUNTER-BORED HOLE THROUGH THE PLATFORM WHICH ALLOWS IT TO BE CLAMPED SOLIDLY TO THE CMM TABLE BY EITHER A 3/8 INCH OR A 10MM DIAMETER SOCKET HEAD CAP SCREW. A PRECISION FLAT-LAPPED ANULAR RING ON THE BOTTOM OF THE PLATFORM FORMS A POSITIVE COUPLING WITH THE TOP OF THE CMM TABLE. AN ATTRACTIVE BLACK OXIDE COATING IS APPLIED TO THE PLATFORM TO RESIST CORROSION.

For more information, please visit this products webpage.
This product was added to our catalog on Thursday 29 May, 2008.
Quantity (Total Balls):
Customers who bought this product also purchased
PROBE CHARACTERIZATION SPHERE, RUNT, STAINLESS STEEL, 25.4 MM, 1 INCHES
PROBE CHARACTERIZATION SPHERE, RUNT, STAINLESS STEEL, 25.4 MM, 1 INCHES
VEE BLOCK, 0.750" ( 3/4" ), CYLINDRICAL POST MOUNTED
VEE BLOCK, 0.750" ( 3/4" ), CYLINDRICAL POST MOUNTED
THREADED BALL, STAINLESS STEEL, 1.000", ( 1" ), 25.4 MM
THREADED BALL, STAINLESS STEEL, 1.000", ( 1" ), 25.4 MM
TRUNCATED THREADED BALL, STAINLESS STEEL, 0.7500", ( 3/4"), 19.05 MM
TRUNCATED THREADED BALL, STAINLESS STEEL, 0.7500", ( 3/4"), 19.05 MM
BALL BAR, PRECISION, STEEL 0350 MM, 13.779 INCHES
BALL BAR, PRECISION, STEEL 0350 MM, 13.779 INCHES
BALL BAR, PRECISION, STEEL 0100 MM, 3.937 INCHES
BALL BAR, PRECISION, STEEL 0100 MM, 3.937 INCHES
Shopping Cart more
0 items

Copyright © 2024 Bal-tec
Powered by osCommerce