Bal-tec

Home Page » Catalog » CMM Products » FS-KIT-750

My Account | Cart Contents | Checkout

Categories

Aluminum Balls
Beryllium Copper ( BECU ) Balls
Brass Balls
Castings
Chrome Steel Balls, Stock
CMM Products
Copper Balls
Hard Carbon Steel Balls, Stock
Kinematic Components
Nylon Balls, Stock
Poly Propylene Balls, Stock
Services
Soft Carbon Steel Balls, Stock ( Least Expensive )
Stainless Steel Balls, Stock
Tantalum Balls, Stock
Teflon Balls, Stock
Tools
Tungsten Carbide Balls, Stock

Quick Find

Information

Shipping & Returns
Privacy Notice
Conditions of Use

What's New?

CHROME STEEL BALL 0.11811", 2.999994 mm Grd:25

CHROME STEEL BALL 0.11811", 2.999994 mm Grd:25
$7.5000

PRE LOAD KIT FOR MECHANICAL CLAMPING
[FS-KIT-750]

$377.0000

PRE LOAD KIT FOR MECHANICAL CLAMPING

Click to enlarge

THE COMPLETE THREE PIECE SET OF KINEMATIC COUPLING HARDWARE AND THE THREE-ELEMENT FAIL-SAFE KINEMATIC CLAMPING KIT CONSISTS OF THE FOLLOWING:

THREE PIECES OF (OUR PART NUMBER #75-VB-CPM), THE CYLINDRICAL POST MOUNTED VEE BLOCK. SEE PAGE 19 OF OUR KINEMATIC CATALOG 105A FOR DESIGN DETAILS.
THREE PIECES OF (OUR PART NUMBER 75-270-CH), WHICH IS THE THREE QUARTER INCH DIAMETER KINEMATIC SPHERE WITH A .270-INCH (6.86 MM) DIAMETER CENTER HOLE. SEE ADDENDUM TO CATALOG 105A.
THREE SETS OF (OUR PART NUMBER 75-ST-270), THE THREE-QUARTER INCH (19 MM) DIAMETER SPHERICAL TILT.
THREE PIECES OF OUR ONE-QUARTER INCH (6.35 MM) BY 20 CONTINUOUS THREADED STOCK THAT ARE 9 INCHES (229 MM) LONG. YOU CAN CUT THESE EXTRA LONG PIECES TO THE DESIRED LENGTH WHEN YOU MAKE THE ASSEMBLY.
THREE PIECES OF ONE-QUARTER INCH (6.35 MM) BY 20 THREADS PER INCH HEAVY DUTY HEX NUTS.
THREE PIECES OF HEAVY DUTY MACHINE WASHERS, ONE INCH (25.4 MM) O.D. BY ONE-QUARTER INCH (6.35 MM) I.D.
THREE PIECES OF A ONE-INCH (25.4 MM) DIAMETER KNURLED CLOCKING NUT (OUR PART NUMBER 250-20-CN) INCLUDING THE BALL THRUST BEARING, A WASHER AND A WING NUT.
THREE PIECES OF SCREWDRIVER SLOT-ONE QUARTER INCH (6.3 MM) BY 20 FLAT HEAD SCREWS BY THREE QUARTER INCH (19 MM) LONG THAT ARE USED IF THE ALTERNATIVE METHOD (SHOWN IN SKETCH #2) IS USED TO CLAMP THE VEE BLOCK TO THE LOWER PLATFORM.

For more information, please visit this products webpage.

This product was added to our catalog on Monday 05 October, 2009.

Quantity (Total Balls):

Shopping Cart

1 x	SATIN FINISH BALL, TITANIUM, 012.7 MM, 0.5 INCHES
1 x	SATIN FINISH BALL, TITANIUM, 025.4 MM, 1.0 INCHES
1 x	ALUMINUM 1100 BALL 0.046717", 1.186612 mm Grd:200
1 x	HARD CARBON STEEL BALL 0.375", 9.525 mm, 3/8" Grd:1000
1 x	ALUMINUM 1100 BALL 0.171919", 4.366743 mm Grd:200
1 x	HARD CARBON STEEL BALL 0.375", 9.525 mm, 3/8" Grd:100
1 x	ALUMINUM 1100 BALL 0.219217", 5.568112 mm Grd:200
1 x	HARD CARBON STEEL BALL 0.375", 9.525 mm, 3/8" Grd:1000
1 x	MONOLITHIC TRIHEDRAL, 0.75", 3/4"
1 x	HARD CARBON STEEL BALL 0.375", 9.525 mm, 3/8" Grd:100
1 x	ALUMINUM 2017 BALL 0.187", 4.7498 mm Grd:200
1 x	ALUMINUM 1100 BALL 0.050666", 1.286916 mm Grd:200
1 x	HARD CARBON STEEL BALL 0.375", 9.525 mm, 3/8" Grd:1000
1 x	ALUMINUM 2017-T4 BALL 0.125", 3.175 mm Grd:200
1 x	ALUMINUM 1100 BALL 0.052298", 1.328369 mm Grd:200
1 x	HARD CARBON STEEL BALL 0.375", 9.525 mm, 3/8" Grd:100
1 x	HARD CARBON STEEL BALL 0.3125", 7.9375 mm, 5/16" Grd:500
1 x	SATIN FINISH BALL, TITANIUM, 038.1 MM, 1.50 INCHES
1 x	HARD CARBON STEEL BALL 0.34375", 8.73125 mm, 11/32" Grd:200
1 x	PLUG FOR MECHANICAL CLAMP, BASE PLATE
1 x	ALUMINUM 1100 BALL 0.281569", 7.151853 mm Grd:200
1 x	ALUMINUM 7075 BALL 0.4378", 11.12012 mm Grd:200
1 x	MAGNETICALLY PRELOADED KINEMATIC COUPLING, SOUTH
1 x	RAW ALUMINUM RISER BLOCK CASTING
1 x	ALUMINUM 2017 BALL 0.0312", 0.79248 mm Grd:200
1 x	PROBE CHARACTERIZATION SPHERE, CERAMIC, 19.05 MM, 0.75 INCHES
1 x	HARD CARBON STEEL BALL 0.3125", 7.9375 mm, 5/16" Grd:500
1 x	ALUMINUM 2017 BALL 0.141495", 3.593973 mm Grd:200
1 x	ALUMINUM 2017-T4 BALL 0.328", 8.3312 mm Grd:200

$1,124.4900

Copyright © 2024 Bal-tec
Powered by osCommerce