Bal-tec

Home Page » Catalog » Kinematic Components » FS-KIT-750

My Account | Cart Contents | Checkout

Categories

Aluminum Balls
Beryllium Copper ( BECU ) Balls
Brass Balls
Castings
Chrome Steel Balls, Stock
CMM Products
Copper Balls
Hard Carbon Steel Balls, Stock
Kinematic Components
Nylon Balls, Stock
Poly Propylene Balls, Stock
Services
Soft Carbon Steel Balls, Stock ( Least Expensive )
Stainless Steel Balls, Stock
Tantalum Balls, Stock
Teflon Balls, Stock
Tools
Tungsten Carbide Balls, Stock

Quick Find

Information

Shipping & Returns
Privacy Notice
Conditions of Use

What's New?

440 STAINLESS STEEL BALL 0.437065", 11.101451 mm Grd:25

440 STAINLESS STEEL BALL 0.437065", 11.101451 mm Grd:25
$12.7000

PRE LOAD KIT FOR MECHANICAL CLAMPING
[FS-KIT-750]

$377.0000

PRE LOAD KIT FOR MECHANICAL CLAMPING

Click to enlarge

THE COMPLETE THREE PIECE SET OF KINEMATIC COUPLING HARDWARE AND THE THREE-ELEMENT FAIL-SAFE KINEMATIC CLAMPING KIT CONSISTS OF THE FOLLOWING:

THREE PIECES OF (OUR PART NUMBER #75-VB-CPM), THE CYLINDRICAL POST MOUNTED VEE BLOCK. SEE PAGE 19 OF OUR KINEMATIC CATALOG 105A FOR DESIGN DETAILS.
THREE PIECES OF (OUR PART NUMBER 75-270-CH), WHICH IS THE THREE QUARTER INCH DIAMETER KINEMATIC SPHERE WITH A .270-INCH (6.86 MM) DIAMETER CENTER HOLE. SEE ADDENDUM TO CATALOG 105A.
THREE SETS OF (OUR PART NUMBER 75-ST-270), THE THREE-QUARTER INCH (19 MM) DIAMETER SPHERICAL TILT.
THREE PIECES OF OUR ONE-QUARTER INCH (6.35 MM) BY 20 CONTINUOUS THREADED STOCK THAT ARE 9 INCHES (229 MM) LONG. YOU CAN CUT THESE EXTRA LONG PIECES TO THE DESIRED LENGTH WHEN YOU MAKE THE ASSEMBLY.
THREE PIECES OF ONE-QUARTER INCH (6.35 MM) BY 20 THREADS PER INCH HEAVY DUTY HEX NUTS.
THREE PIECES OF HEAVY DUTY MACHINE WASHERS, ONE INCH (25.4 MM) O.D. BY ONE-QUARTER INCH (6.35 MM) I.D.
THREE PIECES OF A ONE-INCH (25.4 MM) DIAMETER KNURLED CLOCKING NUT (OUR PART NUMBER 250-20-CN) INCLUDING THE BALL THRUST BEARING, A WASHER AND A WING NUT.
THREE PIECES OF SCREWDRIVER SLOT-ONE QUARTER INCH (6.3 MM) BY 20 FLAT HEAD SCREWS BY THREE QUARTER INCH (19 MM) LONG THAT ARE USED IF THE ALTERNATIVE METHOD (SHOWN IN SKETCH #2) IS USED TO CLAMP THE VEE BLOCK TO THE LOWER PLATFORM.

For more information, please visit this products webpage.

This product was added to our catalog on Monday 05 October, 2009.

Quantity (Total Balls):

Shopping Cart

1 x	302 STAINLESS STEEL BALL 0.0625", 1.5875 mm, 1/16" Grd:100
1 x
1 x	TUNG. CARBIDE BALL 0.15625", 3.96875 mm, 5/32" Grd:25
1 x	HARD CARBON STEEL BALL 0.15625", 3.96875 mm, 5/32" Grd:100
1 x	COMPLETE CYLINDER, STAINLESS STEEL, 0.625", ( 5/8"), 15.875 MM
1 x	TUNG. CARBIDE BALL 0.078125", 1.984375 mm, 5/64" Grd:25
1 x	TUNG. CARBIDE BALL 0.05149", 1.307846 mm Grd:25
1 x	302 STAINLESS STEEL BALL 0.125", 3.175 mm, 1/8" Grd:100
1 x	TEFLON BALL 0.25", 6.35 mm, 1/4" Grd:1
1 x	440 STAINLESS STEEL BALL 1.", 25.4 mm Grd:25
1 x	TUNG. CARBIDE BALL 0.15627", 3.969258 mm Grd:25
1 x	TRUNCATED CYLINDER, STAINLESS STEEL, 0.625", ( 5/8" ), 15.875 MM
1 x	TANTALUM BALL 0.015494", 0.393548 mm Grd:50
1 x	302 STAINLESS STEEL BALL 0.079217", 2.012112 mm Grd:100
1 x	ALUMINUM 1100 BALL 0.052298", 1.328369 mm Grd:200
1 x	440 STAINLESS STEEL BALL 0.749982", 19.049543 mm Grd:5
1 x	316 STAINLESS STEEL BALL 0.4392", 11.15568 mm Grd:100
1 x	HARD CARBON STEEL BALL 0.4375", 11.1125 mm, 7/16" Grd:200
1 x	440 STAINLESS STEEL BALL 0.749999", 19.049975 mm Grd:5
1 x	TUNG. CARBIDE BALL 0.051313", 1.30335 mm Grd:25
1 x	HARD CARBON STEEL BALL 0.125", 3.175 mm, 1/8" Grd:200
1 x	302 STAINLESS STEEL BALL 0.140973", 3.580714 mm Grd:100
1 x	440 STAINLESS STEEL BALL 0.375004", 9.525102 mm Grd:2.5
1 x	SOFT POLISH CARBON STEEL BALL 0.15625", 3.96875 mm, 5/32"
1 x	440 STAINLESS STEEL BALL 1.", 25.4 mm Grd:25
1 x	LOTUS WRENCH, 0.3750", ( 3/8" ), 9.525 MM
1 x	NYLON BALL 0.106", 2.6924 mm Grd:2
1 x	CHROME STEEL BALL 0.024616", 0.625246 mm Grd:25
1 x	302 STAINLESS STEEL BALL 0.0625", 1.5875 mm, 1/16" Grd:100
1 x	316 STAINLESS STEEL BALL 0.472691", 12.006351 mm Grd:100
1 x	POLY PROPYLENE BALL 0.3125", 7.9375 mm, 5/16" Grd:2
1 x	TEFLON BALL 0.15625", 3.96875 mm, 5/32" Grd:2
1 x	TUNG. CARBIDE BALL 0.072015", 1.829181 mm Grd:25
1 x	CHROME STEEL BALL 0.0151", 0.38354 mm Grd:25
1 x	302 STAINLESS STEEL BALL 0.15625", 3.96875 mm, 5/32" Grd:100
1 x	TRUNCATED AND RECESSED CYLINDER, STAINLESS STEEL, .6250", ( 5/8" ), 15.875 MM
1 x	440 STAINLESS STEEL BALL 1.", 25.4 mm Grd:25
1 x	TUNG. CARBIDE BALL 1.439936", 36.574374 mm Grd:25
1 x	SOFT POLISH CARBON STEEL BALL 0.15625", 3.96875 mm, 5/32"
1 x	TRUNCATED CYLINDER WITH BLIND HOLES, STAINLESS STEEL, 1.000", ( 1" ), 25.4 MM
1 x	TUNG. CARBIDE BALL 1.625", 41.275 mm Grd:25
1 x	TRUNCATED BALL, STAINLESS STEEL, 1.000", ( 1"), 25.4 MM
1 x	TUNG. CARBIDE BALL 0.059108", 1.501343 mm Grd:25
1 x	SCREW MOUNTED BALL, 1/2"
1 x	CHROME STEEL BALL 0.431112", 10.950245 mm Grd:3
1 x	BALL, STAINLESS STEEL, 0.625", 5/8", 15.875 MM
1 x	TUNG. CARBIDE BALL 0.06997", 1.777238 mm Grd:25
1 x	302 STAINLESS STEEL BALL 0.04228", 1.073912 mm Grd:100
1 x	302 STAINLESS STEEL BALL 0.09375", 2.38125 mm, 3/32" Grd:100
1 x	POLY PROPYLENE BALL 0.15625", 3.96875 mm, 5/32" Grd:2
1 x	BRASS BALL 0.109375", 2.778125 mm, 7/64" Grd:200
1 x	DIAMOND CHARGED BALL ON STEM, SIZE: 1.00", 6 MICRON DIAMOND LAP
1 x	MAGNETICALLY PRELOADED KINEMATIC COUPLING, NORTH
1 x	316 STAINLESS STEEL BALL 0.500047", 12.701194 mm Grd:100
1 x	CONE, MALE, 90°, 1" DIAMETER, STAINLESS STEEL
1 x	POLY PROPYLENE BALL 0.3125", 7.9375 mm, 5/16" Grd:2
1 x	TANTALUM BALL 0.015464", 0.392786 mm Grd:50
1 x	TUNG. CARBIDE BALL 0.05785", 1.46939 mm Grd:25
1 x	TANTALUM BALL 0.015485", 0.393319 mm Grd:50
1 x	AROUND THE CORNER, 1.00", 25.4 MM, +/- .0001", PIN: 0.125" ( 3.175 MM ) TUNGSTEN CARBIDE
1 x	SOFT POLISH CARBON STEEL BALL 0.125", 3.175 mm, 1/8"

$2,353.6240

Copyright © 2024 Bal-tec
Powered by osCommerce